Automatic trimming machine for aluminium plastic composite panel

Automatic trimming machine for aluminium plastic composite panel Automatic trimming machine trimming machine sawing machine

Automatic trimming machine for aluminium plastic composite panelThe automatic corner trimming machine for aluminium plastic composite panel adopt advanced international technology and experienced design to make stable and reliable quality products, which has caught the eyes of customers at home and abroad.This machine mainly used for corner scraping of the aluminium plastic composite panel and the raw aluminium panel,is suitbale for all kinds of aluminium.FeaturesI.Use high speed motor to drive electric saw to make the surface  slide and equal.II.The adjustment of the gap of the electric saw to ensure in maximum the cutting of many boards which improve the effectivty.III.Hozizonal steel rope stress and adjustment tension device ensure the corner trimming reliable.IV.Whole corner trimming device humanilized design on power one key controlling engine and automatic infrared ray inductor, transfering stable and scraping the other side to reduce the working and improve the efectivity.

V.Sawing, the aluminum plate surface using soft sponge evenly compacting pressure to ensure that panels are not pulling noodle crushed smooth precision sawing.

Sawing, the aluminum plate surface using soft sponge evenly compacting pressure to ensure that boards are not pulling noodle crushed smooth precision sawing.

VI.Under the aluminum trim, PE powder, in the powerful suction of the exhaust fan, in automatically when sawing through the high-temperature wire hose, concentrated PV Tai-caliber suction tube to the outdoor dust, and falling into the garbage bag, simple Convenience to ensure that the environment clean.Technical parameters. I.Cut Length: 4 meter most wide; II.the largest trim thickness: 40 mm: III. trim speed: ~ 7 m / min: IV. transmission diameter: 0100,0200; V. pressure: ≤ 6kg VI. power: (1) main motor: 5.5kw, 2600 r / min; (2) traction motor: 0.85/1.5kw, two-speed motor: 700/1420 rev / min: (3) motor transport aircraft: 370W, 180W, 1400 rev / min.   

Automatic trimming aluminum plate agencies First, the principle of job trimming machine I. long side edge, aluminum plates under lateral rolling stents, by backing out the volume of Pre-cut, unilateral trimming. II. aluminum-plastic plate bogie automatically move up, backing for precise width of the short side, unilateral trim. III.double finished long edges trim, automatic light sensor control, automatic top, the rotating drive belt, the aluminum plate to the short-edge direction of the host, by the light sensor control, bogie Down cylinder, while 90 ° rotational direction of roller chain drive, aluminum plate will be sent to the short edge location, by the light sensor control, bogie suspension of work, while backing out from the short side Pre-cut the amount of trim unilateralism. IV.will be moved to the outside aluminum plate on a rolling scaffold, from backing for precise length, trim the other side. V.trim work, powerful exhaust fan from 0100 through the machine back to high temperature dust sawdust straw, the plane will work 0200Pvc high-speed tube cutting board under the PE powder dust pumped to the device Outdoor storage, trash bags bags . VI.the entire body with stop devices, by rope control, in the event of an emergency, as long as the rope down, cut off all power to stop the job.

Technical dataI.Main motor 5.5kw,two high speed motor,2800/min,to driving highly by 0355 electric rawII.Moving and double speed motor 0.85/1.5kw, to drive the electric raw moving freely.III.SC63*75 air cilinder, air pressure 6kg,magnetize inductor electric controlling raw to move.

Automatic trimming machine for aluminium plastic composite panel